INSTALLATION:
CAUTION:
•
Ensure all packaging materials are fully removed prior to installation.
1)
Power to the circuit should be isolated prior to installation.
2)
Ensure the bulb is being installed into an E27 base.
3)
Remove the old bulb from your existing light fitting, making sure it has cooled enough before
touching.
4)
Install the speaker bulb by twisting it into place, be careful not to over tighten.
5)
Energise the lighting circuit and turn the wall switch to the ‘ON’ position.
6)
Your light should now turn on and a voice command will be heard.
SMART FEATURES (COLOUR CHANGE, DIMMING ETC):
The light output of this product can be controlled by either a remote or via the Smart Lighting App.
Please read the iGlo user manual (enclosed in box) for detailed operating instructions.
SPEAKER:
The speaker is operated via Bluetooth, to use follow the instructions below.
1)
Ensure your light bulb is receiving power, you can check this by turning the light on via the
remote or your mobile application.
2)
Enable Bluetooth via your handheld device or tablet.
3)
Under the Bluetooth settings page on your device you should now see your speaker bulb
appearing in the list of devices – it’s name varies slightly between each speaker bulb.
4)
Select the bulb to being pairing.
5)
Once paired the bulb will emit an audible command acknowledging that it has been paired.
6)
You can now operate your speaker bulb via your device. Music can be played via your existing
music applications e.g. Apple Music, Spotify, Pandora etc.
7)
Control the sound output of your speaker via your device using the volume controls.
INSTALLATION GUIDE:
LED SPEAKER BULB
FIG 1:
