CDB Goldair GOC1611, Operating Instructions Manual

Page: 6 / 12

Wi ng Nut x2
U-s hape Bolt x2
Wheel Castor x2
Assembling Your Oil Column Heater
Ma i n Body x1
IMPO RTAN T: Please fit the wheel assemblies as per the diagram. Any other position
may affect the stability of the heater.
1. Carefully turn the heater upside-down on a non-scratching and stable surface to
prevent damage to the paint finish or your floor surfacing.
2. Fit the wh eel assemblies onto the Main Body by placing the U-shaped bolts
between the outermost fins on each side of the heater.
3. Securely fasten the wheel castors to the h eater by screwing the wing nuts onto the
U-bolts.