background image

SUPPORT AND TECHNICAL ADVICE

Goldair

New Zealand

Monday 

Friday 8am-5pm

Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]

Goldair

Australia

Monday 

Friday 8am-5pm

Phone +61 (0)3 9365 5100

Phone 1300 465 324

[email protected]

TECHNICAL SPECIFICATION

Model No:

GOC155

GOC157

GOC1511

Supply:

220-240VAC 50Hz

220-240VAC 50Hz

230-240VAC 50Hz

Wattage :

1000W

1500W

2300-2400W

PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.

Operating Your Heater

SAFETY DEVICES

This appliance has three protection devices:

Tilt Switch - this will automatically turn the appliance off if the appliance is not in
the correct operating position.

Resettable Thermal Link - this will automatically disconnect the power to th e
appliance at a pre-set overheat temperature. After cooling down it will reset and
power on again. If this occurs, investigate what is causing the appliance to overheat.

Thermal Fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).

CAUTION:

The appliance generates heat during use. Precautions must be

taken to prevent the risk of burns, scalds, fires or other damage to persons.

CARE AND CLEANING
The heater requires regular cleaning to ensure trouble free operation:

Unplug the heater from the mains supply before cleaning.

Ensure that the heater has been allowed to cool down completely before cleaning.

The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.

Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.

Never use solutions such as petrol, thinners or polishing agents.

Ensure the heater is dry before plugging back into the mains supply.

This appliance cannot be serviced. Do not attempt to dismantle.
There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician.

When disposing of the appliance, follow the regulations concerning disposal of oil.

Summary of Contents for Goldair GOC1511













Reviews: