9
Salt and rinse aid warning lights and End of programme light
When the dishwasher salt or rinse aid begins to run out, the relevant
warning light will illuminate to advise that it needs refilling.
When the set programme has finished, the dishwasher will emit five
beeps and the end of programme indicator light will illuminate.
Starting a programme
•
Press the ‘Power’ button.
•
Press the ‘Programme selection’ button until the required
‘Programme’ light is illuminated.
•
If required, press the ‘Delay Timer’ button.
•
Once the power is switched on, the ‘End of programme’ Indicator
light will switch on.
•
Once a programme is selected, the ‘End of programme’ Indicator
light will switch off, and the ‘Programme Indicator’ light will switch
on.
•
When you close the dishwasher door the programme will start
automatically.
Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply
press the ‘Programme selection’ button.
At the end of a programme
If possible, do not open the dishwasher door once the programme has
started.
At the end of the programme, the dishwasher will beep five times, and the
‘End of programme’ Indicator light will switch on.
Summary of Contents for WC432
Page 17: ...17 Poorly stacked loads ...
