7
Co
n
tact a qualified tech
n
icia
n
to ca
rr
y out
the applia
n
ce elect
r
ical co
nn
ectio
n
.
I
m
po
r
ta
n
t:
Before connecting the drawer to the
domestic power supply to check its operation,
always make sure the drawer power cable is
correctly fitted and NOT squashed or caught
under or behind the drawer or a combined
appliance.
I
m
po
r
ta
n
t:
Power cable replacement must be
made with a cable having the same characteristics
as that supplied by the Manufacturer (type
H05RRF, 3x1 mm2 or higher) and carried out by
the After-Sales Service or a qualified technician.
Before connecting the appliance to the power
supply, make sure that the technical specifications
(voltage: V and frequency: Hz) given on the rating
plate match those of the power mains.
In case of doubt, contact a qualified technician.
If the plug is removed from the power cable,
contact a qualified technician for fitting and
connecting the appliance. Contact an electrician
aware of the local regulations and the electricity
company's regulations, ensuring that the work is
carried out in compliance with the same.
I
m
po
r
ta
n
t:
Make sure the appliance is connected
to an approved earth wire, to guarantee electrical
safety. If necessary, have the system checked by a
specialised technician.
The Manufacturer declines any liability for injury
and damage due to the lack or interruption of the
earth wire.
I
m
po
r
ta
n
t: the ea
r
th co
nn
ectio
n
is
co
m
pulso
r
y by law.
If the appliance is connected to the power supply
by means of an extension cord, make sure the
cord and connection are insulated against
moisture.
The appliance is designed to be used only when
correctly fitted.
Never open the appliance casing. In case of contact
with live wires or if the electrical and mechanical
structure of the appliance is modified, an appliance
fault may occur when it is used.
If the installation, maintenance or repair works are
not carried out correctly, there may be risks for
the user. The Manufacturer declines any liability for
damage or injury in such cases.
During the warranty period, repairs must only be
carried out by the authorised technical service,
otherwise the warranty right is lost.
Installation, repair and cleaning operations must
only be carried out after ensuring that the
appliance is disconnected from the power supply.
The appliance is disconnected from the power
supply in the following cases:
- the electrical system main switch is turned off.
- The safety switch is turned off.
- The appliance is unplugged.
Grip the plug and not power cable to unplug the
appliance.
It is advisable to connect the appliance to the
power supply by means of a socket;
this will facilitate technical assistance operations, if
necessary.
Ensure that the socket is accessible even once the
appliance has been fitted.
If connection is not made by means of an electrical
socket, contact an electrician aware of the local
regulations and the electricity company's
regulations,
ensuring that the work is carried out in compliance
with the same.
If the socket is no longer accessible after fitting the
appliance or if a fixed connection is provided for, a
separation device for each pole must be arranged
by the installer.
Switches with contact opening of at least 3mm are
valid separation devices.
The specifications necessary for connection are
given on the dataplate. These specifications must
match those of the power supply.
The Ma
n
ufactu
r
e
r
decli
n
es a
n
y liability fo
r
i
n
ju
r
y o
r
da
m
age due to i
n
co
rr
ect i
n
stallatio
n
,
i
m
p
r
ope
r
, w
r
o
n
g a
n
d u
nr
easo
n
able use of the
applia
n
ce.
The
m
a
n
ufactu
r
e
r
also decli
n
es a
n
y liability
fo
r
da
m
age (e.g. elect
r
ic shock) caused by the
lack of, o
r
i
n
te
rr
uptio
n
of the ea
r
th wi
r
e.
After installation, all the parts of the appliance must
be insulated, to prevent accidents during
operation.
ELECTRICAL CONNECTION
