CDA SV430 Manual For Installation, Use And Maintenance Download Page 15

Mains Electricity Connection

Warning! This appliance must be earthed

We recommend that the appliance is connected by a qualified electrician, who is a 
member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.

This appliance is intended to be connected to fixed wiring and is not suitable for 
connection to a 13A plug or 13A supply.

This appliance is intended to be connected to fixed wiring by a double pole switch, 
having a contact separation of at least 3mm in all poles. The switch must be positioned 
no further than 2m from the appliance.

This appliance is supplied with a 3 core mains cable; the wires are in accordance with the 
following code:

Green and Yellow = Earth

Blue = Neutral

Brown = Live

Please note:

•  

The mains cable must only be replaced by a qualified electrician or service engineer  

 

and must be of equivalent or better rating (i.e. 1.5mm

2

, HO5V2V2-F).

•  

The marking of the current rating of the fuse or circuit breaker protecting this appliance  

 

should be marked on the socket outlet (16A).

•  

Assembly and electrical connection should be carried out by specialised personnel.

•  

When installing this product we recommend you seek the help of another individual.  

•  

The mains isolation switch must be accessible after installation.

Fig. 15

N L

Blue

Brown

Green/yellow

14

Summary of Contents for SV430

















Reviews: