
6
| Instruction Manual
Setting the time
When first connected to the power supply, the digital display will flash
0.00
. The oven will not operate until the time is set.
• Simultaneously touch
and
until you see the dot below the
symbol flashing
• Touch
or
within 7 seconds to set the current time. Once the
desired time is set, allow 7 seconds for the dot to stop flashing
followed by a beep. The time can be adjusted again at any time by
pressing
and
simultaneously and following the same steps
Minute minder
You can activate the minute minder at any time regardless of the
status of other functions. It can be set from 1 minute up to a maximum
of 23 hours and 59 minutes.
To set the minute minder:
• Touch and hold and the display will show a flashing
• Use the
and
sensors to set the time desired. The display will
show the set time and the symbol will be visible
• Once the set time elapses an alarm will sound and the icon
flashes. Touch and hold either
/
or to mute the alarm.
After approximately 7 seconds the will be off and the display will
show the current time
Please note:
If no sensor is touched the alarm will turn off automatically after
approximately 7 minutes.