27
•
Use a cross-headed screwdriver
to undo the screws on either side
of the upper door slat (Fig.7).
•
Use a flat-headed screwdriver to
remove the upper door slat by
prying it gently at the sides (Fig.
7).
•
Remove the door slat, as per fig.
8, and place it somewhere safe
where it will neither receive nor
cause damage.
•
Remove the inner glass from
the blocks it is seated within
(near to the hinges) and place
it somewhere safe also. Pay
attention to the way that the glass
is facing as it will need to be
replaced in the same direction.
The smooth surface of the
glass should be facing upwards
(inwards if the door was back in
place) with the patterned side
facing the oven door handle.
•
Clean the door glass with warm,
soapy water and wipe dry with a
clean microfibre cloth.
•
The middle panes of glass can also be removed but it is important
that these panes are reinserted facing the same way that they
were when removed.
Fig. 7
Fig. 8
