26
Important notes on the oven timer/programmer
•
You will need to set the time on the electronic programmer
before the functions will begin to work (see page 10).
•
You can change the tone of your programmer. To do so, touch
and hold the < and > sensors simulatenously. Then press menu
until ‘ton’ and a number appears on the display. Use the < and >
sensors to select a new tone. Touch nothing for approximately
7 seconds and the tone should set.
•
IMPORTANT: The programmer goes on standby (dims) after 7
secs of inactivity. It also does this between 22:00 and 06:00.
•
You can change the brightness of your programmer’s
standby mode. To do so, touch and hold the < and > sensors
simulatenously. Then press menu until ‘bri’ and a number
appears on the display. Use the < and > sensors to select a new
level between 1 (dullest) and 9 (brightest). Touch nothing for
approximately 7 seconds and the level should set.