10
Programming the Oven (SA227 Only)
IMPORTANT: THE CLOCK MUST BE SET TO ENABLE THE OVEN
TO WORK.
The alert beep will cut off after seven minutes if it is not switched
off manually.
Setting the clock
The clock is preset to 00:00, and will revert to this after a power
failure.
•
With the oven switched off, press and at the same time.
•
Select the correct time by pressing the increase and decrease
buttons.
When the correct time is shown on the display, the clock will set
after approximately five seconds delay.
Setting the volume of the beep
•
When the current time is shown on the clock display, press and hold
. The beep will sound three times.
•
Continue to press until the volume is at the correct level. Each
press of the button will cycle through the options.
1
2
3
4
5
6
buttons
functions
display
field
fig. 1
