CDA Matrix MHN101FR User Manual Download

Page: 25 / 28

Mains Electricity
Connection

Warning! This appliance must be

earthed.

We recommend that the appliance is

connected by a qualified electrician,

who is a member of the N.I.C.E.I.C. and

who will comply with the I.E.T. and local

regulations.

This appliance is intended to be

connected to fixed wiring and is not

suitable for connection to a 13A plug

or 13A supply.

Live L: BN - brown

Neutral N: BU - blue

Earth PE: GNYE -green/yellow

Fig. 9

This appliance is intended to be connected to fixed wiring by a

double pole switch, having a contact separation of at least 3mm

in all poles. The switch must be positioned no further than 2m

from the appliance.

Please note:

•

The mains cable must only be replaced by a qualified electrician

or service engineer and must be of equivalent or better rating (i.e.

4mm2, HO5VV-F).

Summary of Contents for Matrix MHN101FR





























Search results

Summary of Contents for Matrix MHN101FR

Reviews:

Related manuals for Matrix MHN101FR

Brands by name

Popular brands

CDA Matrix MHN101FR, User Manual

Search results

Summary of Contents for Matrix MHN101FR

Reviews:

Related manuals for Matrix MHN101FR

Brands by name

Popular brands