background image

Please note:
Before operating this hob, please read the instructions carefully
After unpacking the appliance, make sure it is not damaged.  In case of doubt, do not use the appliance and contact your 
supplier.
Remove all packaging and do not leave the packing materials in easy reach of children as they may cause serious injury.  The 
packaging materials are recyclable.
Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.
Ceramic hobs become hot and remain hot during and immediately after use.  Do not touch the hob until it has been allowed 
to cool.
After use, please ensure that all the zones have been switched off.
Keep children away from the appliance when in use.

Pan handles should never stand out beyond the edge of the worktop.  This will ensure children cannot reach them.
Do not use pans with rough bases (e.g. cast iron) as these may scratch the hob surface.
Ensure the base of the saucepan is clean and dry before placing it on the zone.
Do not switch on the zones without cookware in place.
Do not lean over the hob when it is in use.
Do not drop heavy or sharp objects on to the hob top.  
Do not scratch the hob top with sharp objects.
Follow the cleaning instructions carefully.
Never put cooking foil or plastic materials on the hob top when it is hot.  These materials could melt and cause damage to 
the hob.
Do not leave inflammable materials on the hob top.
Never use the hob top for storage or as a worktop.
Do not leave wet or damp pan lids on the hob.

Important
Do not use the hob if the glass surface is cracked or damaged to prevent risk of electric shock,  Disconnect it from the power 
supply.
Do not use the hob if the electrical cord is damaged. 
When correctly installed, this hob meets all the safety requirements laid down for this type of product.  However, special 
care should be taken around the underneath of the appliance as this area is not designed or intended to be touched and may 
contain sharp or rough edges, that may cause injury.
This hob (Class 3) has been designed for use only as a cooking appliance.  Any other use (e.g. heating rooms) should be 
considered incorrect and therefore dangerous.
This appliance is not intended to be operated by any means of an external timer or separate remote control system.
Make sure that electrical cords connecting other appliance do not come into contact with the hob top.
Before disposing of an unwanted appliance, it is recommended that it is made inoperative and that all potentially hazardous 
parts are removed.

2

Summary of Contents for HVC60













Reviews: