18
Safety Key Lock
To prevent accidental use, the hob has a safety key lock which
switches controls off temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched off at, or the appliance disconnected from, the mains.
Disconnecting the appliance from the mains will deactivate the safety
key lock.
To switch on the lock, turn on the hob and touch the safety key lock
sensor (10) for approximately 2 seconds. The hob will beep and the
safety key lock LED should illuminate.
To switch off the lock, switch on the hob if necessary and then touch
the safety key lock sensor (10) for approximately 2 seconds. The hob
will beep and the safety key lock LED should extinguish.
Residual Heat Indicator
The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An “ ” will show in a
zone’s indicator if the relevant zone is above 45°c. You should avoid
touching any zone whilst the hob is in use or whilst residual heat
indicators are displayed.
In the event of a power cut or failure, the residual heat indicators will
illuminate after the power supply is restored. When there is no power
supply to the hob however the residual heat indicators will not work,
yet the hob zone(s) may still be hot, so extra care must be taken.
Summary of Contents for HN9611FR
Page 30: ...30 NOTES...
