12
Timer/Minute Minder
The hob is equipped with a timer that allows a finish time to be set
for the end of cooking on any zone, between a minimum of 1 minute
and a maximum of 99 minutes. This timer can be used separately for
each zone, and an LED will indicate the zone positions for each of the
active timers. Once the timers are set, the timer display will show the
time remaining on the first zone to finish cooking. In normal use, the
timer ending prompts the zone heating to end as well. However the
timer can also be used as a minute minder to count down time without
halting heating.
Please note:
At the end of the timer, the selected zone will switch off
and the timer indicators, and relevant timed zone LED, will flash. The
hob will beep for approximately two minutes. To switch off the beep
and the flashing display, touch any key. This beeping also occurs after
the minute minder time has elapsed and the same process to switch
off the beep applies.
To set the timer
•
First switch on the hob if necessary and set the desired zone to the
power level required.
•
With the cooking zone indicator of the selected zone pulsating,
touch the timer indicators (10). The second 0 of the timer indicators
should pulsate. Use the heat setting slider sensor (5) to set the
individual minutes.
•
Next, touch the timer indicators (10) to change adjustment to the
tens of minutes. The first 0 of the timer indicators should pulsate.
Use the heat setting slider sensor (5) to set the tens of minutes.
Summary of Contents for HN6841FR
Page 30: ...30 NOTES ...
