9
Using Your Hob
To switch the hob on
•
To switch the power on, touch and hold the "On/off sensor" (1) for
approximately two seconds. The hob will beep, all four cooking
zone indicators will illuminate with either the symbols shown in part
5 of Fig. 2 or a capital or lower case 'H'.
Please note:
If a power level is not set within ten seconds, the hob
will switch off automatically.
To activate a zone and set a power level
•
Simply set the desired power level using the ‘+’ and ‘-’ adjustment
sensors for the required zone. The standard power levels range
from 1 (minimum) to 9 (maximum). The hob will then begin heating
providing that the correct cookware is being used.
To deactivate a zone
•
Touch the relevant zone's ‘+’ and ‘-’ adjustment sensors simultane-
ously for approximately 1 second.
•
If switching off multiple zones, the above steps need to be taken
for each zone. When all the zones are at "0", the hob will switch off
automatically after approximately ten seconds.
•
Alternatively, to switch off the hob immediately, touch and hold the
"On/off sensor" (1) for approximately two seconds.
Please note:
Any zones that are still hot to the touch will display an
" " provided the mains power supply is not interrupted.
