manualshive.com logo in svg

CDA hn6730, Manual For Installation, Use And Maintenance, Page: 20 / 28

Share
Download
CDA hn6730 Manual For Installation, Use And Maintenance Download Page 20

20

In the event of a fault with the hob, please advise CDA Customer Care 
of any fault code shown on the display

Contact CDA Customer Care
A: 

  Customer Care Department, The CDA Group Ltd, Harby Road, 

Langar, Nottinghamshire, NG13 9HY   

T:

 01949 862 012    

F

: 01949 862 003 

E

: [email protected]  

W

: www.cda.eu

Troubleshooting

On first use

You observe that

Possible Causes

What should you do?

The hob does not work and all 

the displays show “L”.

The key lock is set

Touch and hold the key lock key 

to turn the key lock off.

Installation blows a fuse.

The electrical connection of the 

hob is incorrect

Check that it is set up properly 

(see the Electrical Connection 

section)

You observe that

Possible Causes

What should you do?

The hob does not work and the 

lights on the control panel do not 

switch on.

Electrical connection fault.

Check the power supply.

Protection circuit breaker or fuse 

has tripped.

Replace the fuse or reset the 

circuit breaker.

A small object, grease or water is 

on one of the control keys.

Check the control keys are clean 

and no objects are on them.

9

fast frying steaks

On switching on

Summary of Contents for hn6730





























Reviews:

No comments