21
All displays will show “
8”
and then switch off. The childlock will be
switched back on automatically, and the hob is now configured ready
for use.
NOTE:
•
On first use the power setting is factory set to 7.2kW.
•
In the event of power supply interruption, the hob will remember the
previous configuration setting when the power supply is restored.
To change the configuration setting
1. Switch off the power supply to the hob at the dedicated cooker
outlet (or switched fused spur for 2.8kW setting only).
2. Leave the power supply switched off for at least five minutes.
3. Switch on the power supply again.
4. All the displays will show
“8”
briefly then just the childlock symbol
will show.
5. Follow the instructions under ”To configure the hob at first switch
on” (opposite) from number “3” onward.