background image

5

capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in a 

safe way and understand the hazards involved.

•   Children shall not play with the appliance.
•   Cleaning and user maintenance shall not be made by children 

without supervision.

•   Metal objects such as knives, forks, lids etc. should not be placed 

on the hob as they may become hot.

Precautions to protect the hob

•   Use of damaged pans or those with raw cast iron bottoms may 

damage the hob ceramic glass.

•   Abrasive materials such as scouring cleaners and grits may damage 

the ceramic glass.

•  Avoid dropping objects onto the ceramic glass.
•  Take care not to strike the edges of the hob with saucepans.
•   Ensure that ventilation (as specified under installation instructions) 

remains free from obstructions.

•  Do not place empty saucepans on the hob.
•   Sugar, synthetic plastics or aluminium foil must not be allowed 

to come into contact with the heating zones; these may cause 

permanent damage to the ceramic glass.  If these should 

accidentally fall onto the hob, turn it off immediately and carefully 

remove them.  Take care not to burn yourself.

•  Never place any hot items on the control panel.
•   If a drawer is located below the hob, ensure a horizontal divider is 

installed leaving a minimum gap of 2cm above it for hob ventilation, 
and protecting the drawer contents from striking the hob.  The 

Summary of Contents for hn3620





























Reviews: