manualshive.com logo in svg

CDA HG7251, Manual, Page: 23 / 24

Share
Download
CDA HG7251 Manual Download Page 23

23

E & O E.  All instructions, dimensions and illustrations are provided for guidance only.  CDA reserve the 

right to change specifications without prior notice.

•

   To ensure the optimal life expectancy of the gas hob, please follow 

the operation and maintenance guideline strictly; please do not 

modify the appliance.

•

   Please contact your local after-sale service for repairing and 

exchanging of the components (such as gas valve, control knob) if 

necessary.

•

   The material of the gas hob is metal, please dispose of the gas hob 

in recycling when the gas hob comes to the end-of-life.

•

   The packaging materials of this appliance are recyclable, please 

make good use of waste materials.

Attribute

Symbol

Value

Units

Model identification

HG7251 & 
HG7351

HG9351

Type of hob

Built in

Built in

Number of gas burners

5

5

EE

Gas burner

Aux: NA

SR: 56.5

SR: 56.5

R: 56.0

Tr: 55.0

Aux: NA

SR: 56.5

SR: 56.5

R: 56.0

Tr: 55.0

%

EE

Gas hob

56.0

56.0

%

PIN Number

HG7251

HG7351

HG9351

2531CT-0054

2531CT-0054

2531CT-0054

2531-YY

Country of destination:GB/IE

Summary of Contents for HG7251

























Reviews:

No comments