5
Using your Hob
To switch the hob on
To switch the power on, touch and hold the for approximately two seconds. The hob will beep and all four zone displays will
show zero.
Please note: If a power level is not set within ten seconds, the hob will switch off automatically.
To set the power level
There are power keys for each individual zone which allow you to set the power level by touching the or keys for the zone
required.
To increase the power level from 1 (minimum) to 9 (maximum), touch the key
To go straight to power level 9, touch the key when the zone display shows
0
.
To turn the power off
To switch off a single zone, touch the and keys for the zone no longer required. This will set the power level to zero.
Alternatively, touch the key until the zone display shows zero. When all the zones are at zero, the hob will switch off
automatically after approximately ten seconds.
Alternatively, to switch off the hob immediately, touch and hold for approximately two seconds.
Booster
The hob is equipped with a booster function, allowing a higher power level than the maximum for approximately ten minutes. To
turn on the booster function, touch the key when the power level is already set at 9.
P
will show in the display. To cancel the
booster at any time, touch the key to return to power level 9.
Timer
The hob is equipped with a timer that allows a finish time to be set for the end of cooking on any zone, between a minimum of
one minute and a maximum of 99 minutes. This timer can be used only one zone at a time.
To set the timer
First switch on the hob.
Touch either the
or
keys. The timer display will show
00
and the zone displays will flash
t
.
Set the power level for the zone requiring the timer by touching the or minus keys for the required zone. The timer indicator
LED will illuminate on the zone to confirm the timer is selected.
Set the required duration using the
or
keys within five seconds. Touching the
key will go straight to the maximum 99
minutes. Touch and hold the
or
keys to scroll through the duration quickly.
After approximately five seconds, the LED and the timer display will stop flashing and the countdown will start. The timer display
will show the minutes remaining until the last minute, when it will show the seconds remaining.
At the end of the timer, the selected zone will switch off and the timer display and the zone timer LED will flash. The hob will
beep for approximately one minute. To switch off the beep and the flashing displays, touch any key.
To cancel the timer
Touch the
or
keys together.
Please note: Cancelling the timer will not switch off the zone. You should switch the zone off manually if required.
Please note: the power level can be adjusted during the countdown using the or keys.
