CDA HCE540 Manual For Installation, Use And Maintenance Download Page 7

Mains Electricity Connection

Warning! this appliance must be earthed

We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who 
will comply with the I.E.E. and local regulations.

This appliance is intended to be connected to fixed wiring and is not suitable for connection to a 13A plug or 
13A supply.

This appliance is intended to be connected to fixed wiring by a double pole switch, having a contact separation of at 
least 3mm in all poles. The switch must be positioned no further than 2m from the appliance.

This appliance is supplied with a 3 core mains cable; the wires are in 
accordance with the following code:

Green and Yellow = Earth

Blue = Neutral

Brown = Live

Please note:

•  

The mains cable must only be replaced by a qualified electrician or service engineer and must be of equivalent or    

 

better rating (i.e. 2.5mm

2

, HO5RR-F).

•  

This appliance is intended to be connected to the mains supply with a cable of cross section area 2.5 mm². A larger  

 

cable may not fit the terminal connections.

•  

The marking of the current rating of the fuse or circuit breaker protecting this appliance should be marked on the  

 

 

socket outlet.

•  

Assembly and electrical connection should be carried out by specialised personnel.

•  

When installing this product we recommend you seek the help of another individual.

 

6

Fig.3

Blue

Brown

N L

Neutr

al

Liv

e

Earth

Green/yellow

Summary of Contents for HCE540













Reviews: