How to use the hob
The Timer/ Minute Minder
The timer allows you to preset the length of time any of the zones will be on, between a minimum of one minute and
a maximum of 99 minutes. The timer can be used on each zone separately and can also be used as a minute minder, to
countdown the time without using any of the zones.
To set the minute minder
Switch on the hob
Touch . The timer display will show 00 and a dot will show on the timer display.
EITHER Touch and hold until the required time shows on the display to set the time from zero.
OR To go straight to 99 minutes, touch .
Then touch either or to adjust the time further. After approximately ten seconds, the hob will beep to confirm.
The timer will start as soon as the time has been set.
At the end of the set time:
The timer display will show 00.
The hob will beep for approximately 2 minutes. To switch off the beep and turn off the timer display, touch any key.
To set the timer
Switch on the hob, select the zone and set the power level.
Touch . The timer display will show 00 and a dot will show on the timer display. The timer zone indicator will flash
to show which zone timer is being set. If more than one zone is in use, touch repeatedly until the required timer
zone indicator flashes.
EITHER Touch and hold until the required time shows on the display to set the time from zero.
OR To go straight to 99 minutes, touch .
Then touch either or to adjust the time further.
Please note:
The timer will start as soon as the time has been set.
If more than one zone timer is set, the timer display will show the countdown with the least time to run.
At the end of the set time:
The zone will switch off
The timer display will show 00, then will switch off if no other timers have been set
The zone display will show H to indicate the residual heat.
The hob will beep for approximately 2 minutes. To switch off the beep, touch any key.
If no other zones are in use, the hob will switch off automatically.
To change the timer once set
Touch for the required zone.
Touch either or to adjust the time.
To cancel the timer once set
Touch for the required zone.
EITHER Touch and together to cancel the timer.
OR Touch until the timer display shows 00.
Please note:
If you cancel the timer, the zone will continue at the set power level until it is switched off as described above.
6
