22
How to install the hob
Overall dimensions of the hob:
Width: 900 mm Depth: 350 mm
Worktop cut-out dimensions:
Width: 885 mm Depth: 340 mm
If a splashback/worktop upstand is to be fitted, take this into account
when cutting the hole. The minimum distance that the hob should be
positioned away from the rear wall or splashback is 50mm.
1 - Worktop
3 - Ceramic hob
3
2
1
2 - Hob seal
Fig.7
1. Make the required hole in the worktop.
Before doing this, you must check the
instructions supplied with any cooker hood to ensure that you will
have the required clearance. The cut-out (Fig.8) shows a 60mm gap
from the worktop edge to the cut-out edge. The distance from the
hob, when fitted, to the back wall is to be 50mm.
Rear Wall
Front edge of worktop
Adjacent vertical surface
(cupboard etc. -
Measurement applicable
to both sides.)
885
340
Min.
Cut-out
50
Min. 60
Min.
55
Fig.8
Summary of Contents for HC9626FR
Page 26: ...26 Notes...
