18
fig. 7
fig. 8
fig. 9
fig. 10
Reversing the
Door
It is possible to reverse the door on
this appliance, if required.
To do so, follow the steps below:
1. Remove the rear ventilation trim
(2) by removing screws (1) and
then remove the front ventilation
trim (4) by removing screws (3) as
shown in figure 7.
2. Remove the lower hinge (5)
by removing the four screws
(6) as shown in figure 8. Support
the door as you do this to prevent
damage.
3. Gently lower the door away
from the top hinge and place on
a padded surface to avoid the
risk of damage as shown in figure
9.
4. Remove the upper hinge (10)
as shown in figure 10.
5. Unscrew and transfer pins (7/8)
from the lower hinge plate to the
opposite side as shown in figure
8.
Summary of Contents for FWC152
Page 22: ...22...