Reversing the door
It is possible to reverse the door on this appliance, if required.
To do so, follow the steps below:
1. Unscrew all the screws (1), the blanking cap and the hinge plate from the top of the wine cooler with a Philips or posi-
drive screwdriver.
2. Unscrew the upper hinge pin from the top of the door with a flat-head screwdriver.
3. Remove the hinge plate from the door, and then remove the door from the unit.
4. Unscrew screws 6 and 7 with the Philips or posi-drive screwdriver, and remove the lower hinge pin from the bottom of
the wine cooler.
5. Fix the lower hinge pin with screws 6 on the opposite side.
6. Fix the blanking cap with screws 1 on the opposite side.
7. Fix the hinge plate with screws 1 on the opposite side.
8. Rotate the door 180º, position the lower hinge pin in the hole at the bottom of the door, then insert the hinge plate into
the hole at the top of the door.
9. Insert the upper hinge pin into the hole at the top of the door, then screw it in with the flathead screwdriver.
10. Insert the blanking cap into the wine cooler and fix with screws 1.
Table of parts
1. Screw
2. Blanking cap
3. Hinge plate
4. Upper hinge pin
5. Lower hinge pin
6. Screw
7. Screw
8. Door
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
