7
Care and maintenance
IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING
OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and could damage the control
panel markings.
You can clean your extractor effectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean cloth.
Take care not to use water in excess when cleaning the extractor.
This will help to prevent water entering the internal workings of the
extractor and therefore help to preserve its life-span. We recommend
keeping the cleaning cloth only damp at all times.
When cleaning the stainless steel trims on the appliance, we
recommend cleaning in the same direction as the brush finish on the
steel (i.e. horizontally). This will help to prevent unsightly markings.
IMPORTANT:
Always protect surfaces immediately beneath the extractor (such
as a hob) with a clean, dry towel or similar item before carrying
out any cleaning or maintenance in case of falling parts/items.
