background image

3

Important

The CDA Group Ltd cannot be held responsible for injuries or losses 
caused by incorrect use or installation of this product. Please note that 
CDA reserve the right to invalidate the guarantee supplied with this 
product following incorrect installation or misuse of the appliance or 
use in a commercial environment. 

This appliance is not designed to be used by people (including 
children) with reduced physical, sensorial or mental capacity, or 
who lack experience or knowledge about it, unless they have had 
supervision or instructions on how to use the appliance by someone 
who is responsible for their safety.

Under no circumstances should any external covers be removed for 
servicing or maintenance except by suitably qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for 
reference, to assist CDA Customer Care in the event of a fault with 
your appliance and to register your appliance for guarantee purposes.

  Appliance Model

  Serial Number

EU Declarations of Conformity:

This appliance has been designed, constructed and marketed in 
compliance with safety requirements of EU Directive 2014/35/EU (LVD) 

Summary of Contents for EZA60BL





















Reviews: