4
Please note:
•
Under no circumstances should the extractor be
connected to any gas ventilation system, flue system or
hot air ducting system.
•
Do not vent the extractor into an attic or loft space.
•
Only house the extractor in rooms with adequate
ventilation. Remember that the extractor is powerful and
whatever air is extracted needs to be replaced.
•
Do not tile the extractor in. It should be removable for
service or maintenance.
•
Do not use silicone sealant to secure the hood to the wall.
•
You must be able to isolate the extractor from the mains
electrical supply after installation.
•
This extractor has been designed to be used in a room
with a volume of less than 36m3.
•
Steam cleaners must not be used when cleaning this
appliance.
•
The performance of your extractor will vary depending
on a number of factors. These include: type of extraction,
length of ducting, room volume, ventilation available and
cleanliness of the filters.
Summary of Contents for EVX101
Page 21: ...21 Typical Installation Examples ...
Page 26: ...26 ...