5
Using your Extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.
To switch on the extractor and set the speed level
- Touch key A or press button 1 on the remote. The appliance will
switch on at the last speed level used.
- To increase the speed level touch key C or button 2 on the remote.
- To reduce the speed level touch key B or button 4 on the remote.
The speed cycles through speed levels, and the relevant number
indicator will show on the display.
- To switch the extractor off, touch key A or button 1 on the remote.
The intensive function
The extractor is equipped with an intensive function which runs for ten
minutes before returning to the previous selected speed level.
- To activate the intensive function press key D or button 5 on the
Add a picture of the control panel and the remote control
here - though they may need drawing :-(
fig. 1
H
G
A
B
C
D
F
E
5
2
4
3
6
1
Summary of Contents for EVX100
Page 21: ...21 Typical installation examples...
Page 27: ...27...
