30
Installation "C" By Using Housing Unit
(figs. 29, 30, 31)
– Remove the single oven shelf, if fitted, as indicated in figure 29.
– Remove the upper cross member support as indicated in figure 30.
– Cut the bottom of the housing as indicated in figure 30.
– Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as indicated in figure 31.
– Check the position of the cabinet legs to ensure the cut-out does not interfere with the legs support.
Otherwise the cabinet may have to be removed as in INSTALLATION TYPE "
B
".
– Mount the 2 (two) metal supports “
B
” (supplied with the appliance in a separate kit) as indicated in Figs. 31).
– Build in the double oven making it slide on the metal supports “
B
”.