CDA CVC4SS, Manual For Installation, Use And Maintenance

Page: 6 / 16

The Coffee Machine
Press to switch on the coffee machine
After a few seconds, HELLO will show on the display.
The machine will heat up, and COFFEE and WATER will flash on the display. Once the machine is ready for use, COFFEE
and WATER will illuminate constantly, as will the size and number of the coffees last selected (for example 1 SHORT). If
COFFEE continues to flash, add coffee beans to the container. If WATER continues to flash (non-mains plumbed coffee
machines only) add water to the water tank.
Making an espresso coffee
1. Select the number of coffee cups
The coffee machine can prepare one or two cups of coffee simultaneously.
To select the number required, press until the required number of coffees shows on the display.
2. Grind the coffee
Put the filter handle on the grinder spout and press . The grinder will grind the set amount of coffee beans.
3. Select the coffee size
The coffee machine is equipped with three preset coffee size.
To select the size required, press
to select from the following options:
SHORT - 52ml
NORMAL - 67ml
LONG - 145ml
It is possible to adjust the amount of coffee dispensed. To do so follow the steps below.
1. When the coffee is being made, press until the required amount has been dispensed.
2. The display will show MEMO?
3. Press
to select the size that is to be set.
4. Press and hold to confirm the setting. The coffee machine will beep.
4. Make the coffee
1. After grinding the coffee, place the filter handle on the dispenser spout.
2. Place the cup or cups under the dispenser spout.
3. Press to start dispensing. The coffee machine will dispense the selected amount of coffee. To
stop the coffee machine dispensing before the end of the preset programme, press again.
Dispensing hot water or steam
1. Press to select either hot water or steam and wait for the display to stop flashing.
2. Place the cup or container under the steam nozzle.
3. Turn the control knob anti-clockwise to dispense the hot water, turning it back once the required amount
has been dispensed.
Please note:
Ensure that the spout is placed in a cup or container before turning the control knob, as hot steam can cause scalding.
Always use the handle to move the water spout.
5