8
To remove the grease filters, push in the button on the handle and
then pull down on the filter at the front. When you have released it at
the front, then you can pull the filter out completely.
After rinsing and drying, reassemble the grease filters to the hood by
reversing the removal process.
Please note:
Cleaning the grease filters in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with the
appliance.
Changing the charcoal filter (re-circulating mode only)
To ensure best performance of your extractor, you should replace
the charcoal filters every four to six months, depending on use. The
charcoal filters are an optional accessory. These are available from
the CDA Sales team on 01949 862010 under code CHA34.
To attach the charcoal filters:
•
Remove the grease filters as described above.
•
Align the slots on the charcoal filter with the notches on the side of
the motor. Place the filter onto the motor and turn clockwise slightly.
The filter should hold firmly in place. Repeat with the other side.
•
Finally, replace the grease filters.
