CDA CI340, Manual For Installation, Use And Maintenance

Page: 22 / 24

Safety and Troubleshooting
• If you detect any problems with your washing machine, you will probably be able to rectify them yourself by
consulting the following instructions.
• If this is not the case, unplug the appliance and contact the technical assistance number.
Do not open up the washing machine. It does not contain any fuses or similar components than can
be replaced.
Problems
Why won’t the washing machine start?
This may be due to the following:
• Check the door is properly shut.
• The washing machine is not plugged into the mains or there is no voltage in the mains supply.
• The Start/Pause button has not been pressed.
• If the washing machine door is not properly shut, F04 will appear on the display.
Why is the washing machine vibrating or making too much noise?
This may be due to the following:
• The blocking and transport screws have not been removed.
• The washing machine has not been correctly levelled.
• On spin-drying, the motor makes a kind of whistling noise. This is due to the mechanical action of the motor
itself and is perfectly normal.
Why doesn’t the washing machine take in water?
• If F01 shows on the display this may be caused by a cut in the water supply, a tap turned off or a blocked
water inlet filter.
• The possible solutions are as follows: wait for the water supply to be reconnected, turn on the tap, or remove the
water inlet hose and clean the filter.
20
Indicator Problems
F01 No water coming in
F02 Does not drain or spin-dry
C03 Does not spin-dry
F04 Does not start
F05 - F10 Call the Technical Assistance Team