14
Starting a wash programme
•
Turn the programme control knob to the required programme
•
Turn the spin speed control knob to the required spin speed
•
Select any required extra functions, as detailed below
•
Select any required extra options, as detailed below
•
Press the Start/Pause button
When a wash programme is in progress, the programme can
be paused by pressing the Start/Pause button at any time. The
programme will pause and the Start/Pause button light and progress
indicator will flash. To restart the programme, press the Start/Pause
button again.
For added safety, the porthole door does not open immediately at
the end of programme. There is a time delay of approximately two
minutes before you can open the door.
Programme selection
To select a programme, turn the programme control knob to the
required programme, as detailed in the programme table below
and also on the detergent dispenser. The display will show the
programme time, and the progress indicator will flash for the first
section of the programme.
Spin speed selection
Each selected programme has its own preset spin speed, as shown in
the programme table below.
You can reduce the spin speed or switch it off completely if required
by turning the spin speed control knob.
