CCX Technologies T-RX, User Manual

Page: 35 / 60

T-RX™ User Guide
Version 1.4
Transponder Test Config
External Loss
(dB)
Applies to DRCT or EANT selections only. External loss refers to the loss of
the coax connection and optional coupler to a transponder when using the
DRCT connection, or of the external antenna
​ ​
when using the EANT selection.
Set the external loss by pressing < or >, or manually sliding to the required
external loss level. See External Antenna section for more information
Distance (ft)
Applies to EANT or internal antenna selections only. Distance refers to the
distance in feet from the transponder antenna under test to the T-RX™ when
using the EANT or internal antenna selections.
​ ​
Set the distance by pressing <
or >, or manually sliding to the required distance
Diversity
Antenna
Location
Select from NON-DIVERSITY (Single Antenna), TOP, or Bottom
Altitude
Monitor
Altitude Monitor selected will only display altitude during a test for a higher
update rate. Intended for Altitude Correspondence testing
35