VX 820 ITS
Installation & service manual (version 1.0)
v1.0, Internal
1
INTRODUCTION
1.1
Objective document
This document describes step by step how a VX 820 ITS PIN pad is to be installed. Next, it describes how to open the
menu of the PIN pad. And finally, it explains all menu options that are relevant for installation and service purposes.
1.2
Target group
This document has been written for CCV or third-party Installation & Service Engineers.
1.3
Status document
This document was last reviewed on 03-10-2013 and is based on software configuration version V82XNLITS 10.3.03 (PIN
pad software version 03.74).
1.4
Typographical conventions
To increase the readability of this document, the typographical conventions listed below are used.
Layout convention
Type of information
Example
‘Text in-between quotation marks’
Notifications that appear on the
display of the PIN pad or in
AdminLight
Type in <
*
>, <
#
> and three times
<
OK
> as soon as the notification
'START UP' appears on the display.
Bold text
Menu options you have to choose or
buttons you have to press in
AdminLight
Choose menu option
SUBNET
.
<
Bold text between brackets
>
Buttons of the PIN pad you have to
press or menu options you have to
choose on the PIN pad
Type in <
*
>, <
#
> and three times
<
OK
> as soon as the notification
'START UP' appears on the display.
<Text between brackets>
Options you have to choose or
buttons you have to press in
Windows
Choose <Start menu>, <Settings>
and subsequently <Control Panel>.
Red text
Values you have to enter
Enter the password of the merchant
menu (
99999
) and confirm with
<
OK
>.
Red and underlined text
Hyperlinks and cross references
Refer to sub-section
3.2.2
for more
information about the entering of
alphanumerical characters.
CID087A/15042015
© CCV Services B.V.
5 / 45
