12
After power of the ball camera is on, the camera moves horizontally and
vertically automatically first, then pulls the lens to the nearest place, to the farthest
place, and stops after movement is over. Confirm the ball camera operates normally
through self-check.
Control the camera to rotate upwards, downwards, leftwards and rightwards:
After choosing a camera, upward, downward, leftward and rightward
movement of the ball camera can be controlled manually with the rocker on the
keyboard. Swinging of the rocker controls movement of the camera, and the camera
move rightwards when the rocker swings rightwards. Likewise, the camera moves
leftwards when the rocker swings leftward. When the rocker swings vertically, the
camera moves in vertical direction. When the rocker is swung in a diagonal direction,
the camera moves in horizontal and vertical directions at the same time and the
movement direction is the same as that of the rocker.
3
．
2
Setting of preset point
Set preset point in accordance with the following steps:
(1) Select a camera (refer to instruction for control keyboard for details);
(2) Operate rocker, zoom key, focusing key and aperture key to adjust picture of
the camera;
(3) Press number key+ PRESET(input the designated number of preset point,
and save parameters of the preset scene.
3
．
3
Invoke preset point
Set preset point in accordance with the following steps:
(1) Select a camera;
(2) Press number + PREVIEW (input a designated number of preset point), the
camera moves to the preset point immediately, changes zoom, focusing and aperture
of lens to preset parameters automatically; If a preset point with special functions is
input (refer to preset point function table), the ball camera will perform the function
for preset point with special functions (e.g. if No.99 preset point is input, the camera
will perform automatic scanning function).
