background image

CCM / EXM-1481 

 

1

USER MANUAL 

MECHANICAL IR FILTER OLPF 

DAY/NIGHT 

DIGITAL COLOR CCD CAMERA 

1/3” HI. RESOLUTION 

24VAC + 12VDC 

 

 

1. General description 

This 1/3” Day/Night color CCD camera, with high resolution (470/410 k) picture 
elements, is equipped with a mechanical IR filter and advanced Digital Signal 
processor to provide an unprecedented optimal image with vivid and stable true color 
picture up to 500TVL (color mode) in Day time and 520TVL (b&w mode) without focus 
shift when under IR light at night time.   

 

2. Features 

a.

 

Day/Nigth mode: The built in mechanical IR filter design allows the camera to work 
at true color mode under day light condition and Mono mode under no visible light 
condition with IR projector. 

b.

 

Resolution: perform 500 TV line at day time (color) and 520 TV line at b&w 

c.    Low light sensitivity: By employing high sensitivity image sensor and low noise 

circuit design the camera is capable of a 0.5 lux (color mode) and 0.1 lux(b&w 
mode) low light sensitivity produces and a 48 dB signal-to-noise ratio. 

d.    White Balance: The wide range Auto Wide Balance (AWB) and Auto Tracing 

white balance (ATW) allowing the camera to adjust color tone automatically 
according to the color temperature of the light source illuminating the subject. 

e.    Back Light Compensation: Smart digital control Auto BLC, enable the camera to 

be used against any unusual back light conditions. 

f.  Auto Exposure System: Advanced Auto Exposure System for both CCD iris and 

auto iris lenses controlling the amount of light to ensure the optimal picture 
quality. 

g.    User selectable Internal or external Line-lock sync. mode. 

Summary of Contents for CCM-1481









Reviews: