color temp. is 1800°K~10500°K.
INDOOR : Select this when the color temp. is 4500°K ~
8500°K.
OUTDOOR : Select this when the color temp. is 1800°K
~10500°K (sodium light inclusion).
AWC->SET : Set the point the camera towards a sheet of
white paper and press the SET button.
Manual : It allows you to increase or decrease the red or
blue factor on screen.
4) BACKLIGHT
<Option : BLC / HLC / OFF>
BLC : Provides light level control to overcome severe
backlighting conditions.
HLC : High Light Compensation. Removing the high light
and it makes possible to view the image clearly.
5) DNR
<Option : ON / OFF>
Reduces noise/distortion on the screen, Increasing the
DNR level reduces noise but may introduce video artifacts.
DNR is deactivated if AGC is turned off.
6) DAY/NIGHT
<Option : COLOR/BW/AUTO/EXTERN>
COLOR : Full time color mode.
BW : Full time black and white mode.
AUTO : Automatically detect color or black/white
EXTERN : Same function as "AUTO", but with external sensor
such as CDS sensor.
6. SPECIAL Menu Functions
On the SETUP menu, press the menu control UP or DOWN
and then select SPECIAL.
Press the SETUP(MENU) control to access the SPECIAL
MENU.
1) CAMTITLE
<Option : OFF / ON>
UP, DOWN, LEFT, RIGHT menu control = Select a
character, then press (SETUP)MENU to accept it. The
character is saved and the title cursor at the bottom of the
screen moves to the next position.
←
→
= Go back or forward in the title name to make changes.
CLR = Delete the entire name and start again.
POS = Position the camera title on the screen.
Press (SETUP)MENU to confirm the position.
END = Accept the new name.
Display a name and/or number
on the monitor.
To add a camera title:
INTERNAL = When line lock is not required.
LINELOCK = Adjust the vertical phase(VPH) from 000 -
359 (factory default is 0). Line line is only available with
24VAC power.
RETURN = Press MENU to return to the SETUP menu.
equipment to reduce the effect of
picture roll on the monitor.
L/L (Line Lock) = Adjust the phase from
0
°
~ 359
°
.
3) MOTION DET
<Option : OFF / ON>
SENSITIVITY : Select 8 different Motion Detection area. When
sensitivity number is high, it can recognize even small
movement.
AREA MODE : Activate or deactivate the selected area.
SEL POS : Select setting point from 4 different point, Left-Top,
Left-Bottom, Right-Top and Right-Bottom.
YPOS : Move setting point to vertical direction.
XPOS : Move setting point to horizontal direction.
FILL
SET : Fills selected area with proper color.
RETURN : Save the settings and return to the SPECIAL menu.
Detect moving objects in 8 different
areas on screen;
‘MOTION DETECTED’ is displayed on
the screen when movement is detected.
4) PRIVACY
<Option : OFF / ON>
Mask up to 8 areas of the screen from video monitoring.
AREA SEL = Select up to 8 motion detection area.
AREA mode : Activate or deactivate the selected area.
MASK COLOR : Select area color.
TRANSP : Adjust the transparency of selected area.
RETURN : Save the settings and return to the SPECIAL menu.
5) DIS
<Option : OFF / ON>
Digital Image Stabilizer. Reduce picture movement due to
external factors.
6) LANGUAGE
Choose language that should be displayed.
7) RESET
Restore all factory default settings.
8) RETURN
Return to the main SETUP menu.
This manual is based on the date as shown in the right and
specifications are subject to chage without notice for quality
VER.090714
7) IMAGE ADJ.
<Option : FREEZE / V-REV / H-REV
D-ZOOM / SHARPNESS / RETURN>
FREEZE : To view still or moving pictures.
V-REV : Flip the picture vertically on the screen.
H-REV : Flip the picture horizontally on the screen.
D-ZOOM : Digital zoom of x1 ~x10.
SHARPNESS : Sharpen the image on screen.
Excessive sharpening may cause picture noise.
RETURN : Save the settings and return to the SETUP menu.
