CCM 040-1193-8, Instruction Manual, Page: 4 / 8

model no. 040-1193-8
KEY P
AR
TS/LISTE DE PIECES
INSTRUCTIONS/INSTRUCTIONS
After setting the position, tighten the adjustable
hubs (B) by rotating the knobs (C) clockwise. Ensure
the hub teeth are fully engaged.
B
C
4
CAUTION:
To avoid damage to the vehicle, ensure the lower support leg does not
rest on the rear bumper of the vehicle.
ASSEMBL
Y
6
7
KEY P
AR
TS/LISTE DE PIECES
INSTRUCTIONS/INSTRUCTIONS ASSEMBL
Y
G
G
Insert the hooks of the two side straps (G) into the
body gap on the outer edge of the trunk, hatch or
rear door. Make sure the side straps are at an angle
of 90° from the outer edge of the trunk.
Slide the hooks along the body gap until the strap
is taut at the shortest distance. Tighten the strap in
place.
6
CAUTION:
•
Make sure all the strap hooks are attached to the metal frame of
the trunk and not on the fiberglass, plastic or rear glass of the vehicle
•
Be sure that the straps do not rub against any sharp objects that could
cut or damage them.
A
F
F
Insert the hooks of the two upper straps (F) into the
slots at the leading edge of the trunk or hatch lid of
the vehicle. Make sure the rack arms (A) are
positioned at an angle of about 15º with respect to
the ground. Tighten the upper straps until the bike
carrier holds its position.
SEE 5.1,.2,.3,.4,.5 FOR SUV, CUV OR
MINIVAN WITH A REAR VISOR!
5
Loosen the two adjustable hubs (B) by rotating
the two knobs
(C) counterclockwise. Separate the
two halves of each hub (B) and pull the rack arms
upwards.
B
C
D
A
Position the bike carrier so that the upper support
legs (D) rest on the top of the vehicle's trunk. Adjust the
angle of the upper support leg so that the end of the
rack arms (A) are slightly tilted inwards, towards the
vehicle.
2
3
WARNING:
Be cautious while adjusting the position of upper support leg, as it may
touch the rear glass of the vehicle.