model no. 040-1190-4
INSTRUCTIONS/INSTRUCTIONS
C
B
C
B
A
Insert the right wheel trays (B) and the left
wheel trays (C) onto the rack ams of the centre
bracket (A).
6
ASSEMBL
Y
Note:
This bike carrier can be fitted to vehicles
equipped with a 1 1/4" (3.2 cm) or 2" (5 cm) hitch
receiver
.
• Follow steps 7 to 9 for fitting the bike carrier to
a
2" (5 cm) hitch receiver.
• Follow steps 10 to 12
for fitting the bike carrier
to a
1 1/4" (3.2 cm) hitch receiver.
Remove the
hexagon
bolts
(2) and washers (3)
fitted
to the end of the stinger. Align holes at the end of the
stinger (D) with the upper holes of the centre
bracket (A). Insert the washer and hexagon bolt into
the aligned holes. Tighten them using 5/8" (16 mm)
wrench.
3
2
A
D
5
I
K
J
Insert step bolt (I) into the aligned holes and secure
using flat washer (J) and nylon lock nut (K). Tighten
them using 1/2" (13 mm) wrench (not included).
4
6
7
H
G
Tighten the anti-sway hitch pin (G) using
3/4"
(19 mm) wrench (not included) and secure it using
the hitch pin clip (H).
9
Insert the anti-sway hitch pin (G) into the aligned
holes of the 2" (5 cm) receiver adaptor and hitch
receiver. Secure the pin using the
spring
washer (M) and flat washer (N).
8
G
M
N
STINGER INSTALLATION FOR 2" (5 CM) HITCH RECEIVER
D
4
5
Insert the 2" (5 cm) receiver adaptor (4) of the
stinger (D) into the 2" (5 cm) hitch receiver (5) of
the vehicle.
7
INSTRUCTIONS/INSTRUCTIONS ASSEMBL
Y