INFORMATION DISPLAY :
- production mode
- device set-up
LED INDICATORS :
- production in progress
- flow detected
- cover closed
Browse menus
Browse settings
VALID button
ZELIA ZLT :
QUICK START
At first use,
check that the flow switch into the cell is working properly.
When the filtration system is on, the flow light on the cell (middle) must be on.
After 30 seconds the upper light (production) is on too. (example : it must be on
P9)
Leave the production to work
for 2 minutes
then stop the filtration system.
Check that the flow light turns off
and that the production light flashes. If it
doesn’t, check if the flow switch is blocked. Leave the filtration off for 2 to 3
minutes.
Restart the filtration system (clock or 24h/24)
1
2
3
4
5
FLOW-SWITCH
CONTROL
For installation of the salt chlorination cell, follow instructions in the
user guide
.
The unit must be protected with
30mA differential
residual current
protection.
