Technicalinst. guide
Limpido XC2
v4.0
• water temperature
• the volume of the pool to be treated
• water pH
For the installation’s safety, the Limpido XC2puissance only produces chlorine
when the flow meter indicates that water is actually flowing through the cell.
During these filtering periods, the chlorine production time is composed of two-period cycles (Nor-
mal and Reverse) that alternate electrode polarity. This polarity reversal makes it possible to prevent
the electrodes from scaling.
Thus, the production cycle is split into 4 phases:
1.
Phase 1, normal production (positive)
2.
Phase 2, standby
3.
Phase 3, reverse mode production (negative)
4.
Phase 4, standby
At the end of the filtering period, the Limpido XC2 stops producing and restarts it exactly where
it left off when filtering restarts.
The main benefit of this choice of operating mode is to always guarantee (even if there is a power
failure) that normal and reverse production times are strictly identical and, as a result, guarantee the
best cell descaling possible (giving quality production and long equipment service life).
3.2. Presentation of the Limpido XC2
Effective and optimised production - depending on water temperature - reduced when the automatic
cover is closed - A selection of several production modes
Single block compact and strong cell - fitted with solid titanium plates.
Self cleaning cell using reversed polarity.
Increased safety using flow detection.
Installs in just a few minutes, easy connection.
3.3. Production heat regulation (AUTO mode)
As the water temperature varies during the season, production times must be adjusted. This temper-
ature regulated production is carried out automatically by the Limpido XC2 in AUTO production
mode.
www.c-
cei.fr
4
