Technical instructions
Brio RC+
v1.1EN
5.8. Selecting the radio code
In the event that another radio device is in the vicinity, it may interfere with the operation of your
installation (e.g. a neighbour also has a Brio RC+), the code can be changed. You will also need to
change the code on the Brio RC+ and inside the remote control unit. To do this it is necessary to
1.
Cut the power to the Brio RC+,
2.
Press the key
and hold it,
3.
Turn on the Brio RC+,
4.
Release the key,
5.
Change the current radio code which appears on the screen (
r1
/
r2
/
r3
/
r4
),
6.
Use the keys
and
to set it again,
7.
Press the key
to confirm.
There are 10 switches inside the remote control unit (under the battery cover)
which are used to set the code. To open the device, use a screwdriver as illus-
trated in the drawing.
The code displayed on the screen (
r1
/
r2
/
r3
/
r4
) must correspond to the positions of switches
n°5 and 6.
• A "0" corresponds to the "OFF" switch position
• A "1" corresponds to the "ON" switch position
The other switches must always stay in the same position.
Display
Code
Positions of the switches
r1
0011001010
r2
0011011010
www.c-
cei.fr
11
