BRIO-A300C 21/03/2011
CCEI S.A.
- 8 -
V1.0
The code of the remote control is programmed in factory. If however while pressing on the
keys of the remote control there is no reaction of your module CPL, check the code of the
remote control. Use a screwdriver and remove the screw on the back of the remote. Check
the code on the mini switches which must be placed in accordance with the picture below:
Antenna / Range
The box comes with an antenna with a 40-metre line-of-sight range. If the range turns
out to be inadequate, you will need to connect a separate antenna. The antenna must be set
for 433 MHz and connected, in place of the one provided, to the BNC terminal on the top of
the box.
Reset
It may be necessary to reset the unit if a malfunction occurs.
To reset the BRIO A300C module to zero, use the following procedure:
- Turn off the module (e.g., using its circuit breaker).
- Press the Mode and “+” keys at the same time and hold them down.
- Turn the module back on
