USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 1.0
7
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK to completes the IP parameters setting.
For OS of Microsoft Windows NT:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear. Click
Protocol
tab from the
Network
window.
3.
Check the installed list of
Network Protocol
window. If TCP/IP is not installed, click
the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK to complete the IP parameters setting.
For OS of Microsoft Windows Vista:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The Control
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network Connections
item. The
Network Connections
window will appear. Double click
Local Area Connection
icon,
then
User Account Control
window shown. Right click
Continue
button to set