CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 50 / 359

43
Scroll wheel
1. Press the button "Scroll wheel".
 An empty circle is displayed.
2. Turn the scroll wheel clockwise.
 The segments of the displayed circle are highlighted.
3. Turn the scroll wheel anti-clockwise.
 The segment highlighting is cleared.
4. End the Test with "OK".
Buzzer
1. Press the button "Loudspeaker".
 A sequence of sounds is played.
2. End the Test with "OK".
Brightness sensor
1. Press the button "Brightness sensor".
 The value measured by the brightness sensor is displayed.
2. Cover the brightness sensor.
 The displayed value decreases.
3. Illuminate the brightness sensor with a bright light source.
 The displayed value increases.
4. End the Test with "OK".
Brightness
See section Test brightness.
Stop switch switch setting
1. Press the “Stop switch”.
 The switch setting is displayed.
2. End the Test with "OK".
CAN trace
See section CAN-Trace.
Test brightness
1. Press the button "Brightness".
 The operating screen for testing the brightness opens.
2. Test the brightness status (F9), manual brightness entry (F10 and
F11) and perform the automatic brightness test (F12).