7
1
2
7
1
6
3
4
5
Priming machine before first use
Fit capsule drawer inside the drip tray and slide it into the machine.
Fill water tank with filtered/bottled water.
The beverage buttons and 'No Water' indicator
light will blink simultaneously.
Press any beverage button. Wait for machine to complete the priming
cycle and fill with water. The ‘No Water’ indicator light will switch off.
Note:
Repeat this step if the ‘No Water’ indicator light continues to
blink.
Plug power cord into the socket located on the bottom of the machine.
Place an ample container under the beverage
dispensing spout.
If required, empty water from the used capsule drawer and cup.
Your machine is now ready for use.
13CBV_BB_ManualS07_PH.r1a.indd 7
7/30/13 5:32 PM
