RSA-103A Technical Manual
5
© 2011 CBS ArcSafe
®
2011-12-05
2.0 Opening/Closing the Breaker
1.
Ensure that the unit is properly installed on the circuit breaker and
connected to the RSO as previously described.
ATTENTION
Please ensure that either the batteries on the unit are fully charged or the unit is
plugged into AC power.
2.
To trip the breaker, ensure that the breaker is CLOSED. Next, press and hold the
“TRIP” button until the breaker opens to turn the breaker off.
3.
To close the breaker, ensure that the breaker is OPEN. Next, press and hold the
“CLOSE” button until the breaker closes to turn the breaker on.
