CBC ZM-L304N Instruction Manual Download Page 4

4

Batteries

Incorrect use of batteries could 

result in damage to batteries 

and/or leaking battery 

fl

 uid. 

Damaged batteries could burst 

resulting in 

fi

 re or injury. Always 

observe the following:

 Do not take the batteries apart or 

short them out.

 Do not heat them or dispose of them 

in 

fi

 re.

 Do not use old and new batteries 

together.

 Do not use batteries of two different 

types together.

 Orient the batteries to the polarity 

marked on the battery case.

 Do not attempt to recharge batteries.

 If 

fl

 uid leaking from batteries gets 

in your eyes, rinse them with large 

amounts of water, without rubbing, 

and seek immediate medical atten-

tion. Left untended, it could cause 

blindness.

 If 

fl

 uid leaking from batteries gets 

on your skin or clothes, wash it off 

immediately with water.

Handling the LCD

 Do not press strongly on the LCD, or 

subject it to strong impact. The glass 

of the LCD could break and cause 

injury.

 If the glass of the LCD breaks, never 

touch the liquid inside. If can cause 

in

fl

 ammation on contact with skin.

 If  the 

fl

 uid from inside the LCD 

gets in your mouth, gargle and spit 

with water immediately, then seek 

immediate medical attention.

 If  the 

fl

 uid from inside the LCD gets 

in your eyes, rinse them with water 

for at least 15 minutes, then seek 

immediate medical attention.

Warning

Do not put any foreign objects 

inside the monitor.

If any metal objects get inside 

the monitor they could cause 

fi

 re, 

electric shock or breakdown. Stop 

using the monitor immediately and 

contact your vendor.

Do not place the monitor on 

unstable surfaces

Do not use the monitor in any 

unstable location, such as an 

unsteady table or on a slope. It 

could fall or tip over and cause 

injury.

Do not touch the monitor during an 

electrical storm.

During an electrical storm do 

not touch the metal parts of the 

monitor or its AC adapter. It could 

cause electric shock.

The AC adapter.

Handle the AC adapter with care. 

Using it incorrectly could cause 

fi

 re or electric shock. Always 

observe the following:

 Never connect it to a receptacle that 

is not for the indicated voltage.

 Always use the AC adapter 

provided.

 Do not place anything heavy on the 

AC adapter, or expose to heat.

 Do not modify it, or bend it with 

excess force.

 Do not twist or pull it.

 Do not touch it with wet hands.

Summary of Contents for ZM-L304N

















Reviews: